AMBROSOL Waterproofing Spray 500ml - Transparent

Filler spray suitable on irregular surfaces such as walling, asphalt, masonry, wood and many more. It allows the sealing of holes and cracks, preventing water, moisture and rusting. The final result will be a smooth surface ready to be painted.

Technical Specifications:

• Quantity: 500 ml
• Aspect: Tin-Plate can containing under pressure fluid
• Color: transparent, black, white
• Odor: Typical of solvent
• Relative density: at 20°C 0,96 ÷ 1,03 g/ml
• Flash point: < 0° C/ 32 °F extremely flammable
• Resin: Synthetic
• Solvent: Organic
• Dry residual: 18% - 20%
• Application Temperature: 10 - 32 °C – 50°/ 90 °F
• Umidity: < 85 %
• Pressure at 20°C: 4/6 bar
• Drying times 20°C Dry on touch: 45 minutes
• Full Drying (to over paint): 24 hours

HOW TO USE
Shake vigorously the can for at least 1 minute until you hear the inner marbles move freely. Shake even during use. Remove dirt and, if possible, any pre-existing paint. Do not apply on hot surfaces (> 90ºC/ 194°F). Use outside or in a well-ventilated area. Keep a distance of 20 - 30 cm/ 8 - 12 inches during spraying.
APPLICATION
Apply a first light layer and a second layer at least 45 minutes apart from each other. Depending on the depth and size of the slot / hole, it is possible to apply the product close to the surface to obtain a better filling effect. It is recommended to use on an inclined and / or flat surface. The product may form foam and / or bubbles. You can re-apply after 24 hours of drying. When finished, turn the
bottle over and spray until the product is completely drained to clean the dispenser.