AMBROSOL Rust Converter 250ml

This product penetrates rust transforming it into compounds that are going to strongly anchor the iron. It can be used in the presence of any amount of rust. It is normally used in construction, agricultural, and DIY general maintenance of metal parts.

Technical Specifications:

• Aspect: Plastic can reinforced
• Color: Light brown
• Odour: Typical of solvent
• Relative density: at 20°C 1,04 ÷ 1,08 g/ml
• Flash point: > 100° C
• Dry residue: 18,62 %
• PH: 3,00 / 3,5
• Solubility: Water soluble
• Theoretical yield: 15 m ÷ 20 mt per LT
• Stringiness (cup ford): 30”÷ 35”
• Drying to 20°C: 20’ ÷ 40’
• Overpainted: in 12 h – 15 h
• Thickness / film: (2 hands with brush) 30 micron c.a
• Temperature of exercise: +5°C / + 75°C

PRE-APPLICATION: Brush / scrape and clean the piece to be treated. Remove after rust powder remained with a damp cloth.
APPLICATION: The product is ready to use. Shake the product well before use, avoid dipping directly with brush inside the bottle, dose the necessary product in a plastic container or glass, the application can also be carried out on a wet substrate, the treated surfaces should be over-painted with an excellent anti-rust product or with a protective zinc within 24 hours, the tools used in the application can be cleaned with water.