AMBROSOL Chalk Spray Paint 400 ml - Transparent Varnish

Water based paint with a ultra matt finish effect, suitable for both indoor and outdoor use. It’s ideal for decorating any common surface such as metal, plastic, glass, ceramic etc. especially suitable for turning your old wood furniture into a vintage/modern piece of art. Fast drying finish, low VOC. After your application, when the paint is dry, It is advisable to add wax or transparent varnish which provides that protective layer on your newly modified piece.

Technical Specifications:

• Quantity 400 ml
• Box / Case 6 Pcs.
• Aspect Pressurized liquid can
• Chemical Nature Water based acrylic paint
• Color Various – see color card
• Odor Lightly aromatic
• Relative density at 20°C 0,76 ÷ 0,80 g/ml
• Flash Point Extremely flammable < 0° C
• Writing underneath the can Barcode, batch date, product name
• Pressure at 20°C 5,0 ± 0,5 bar
• Viscosity Ford Cup 4500 – 5500 mPa.s A4 – V20 (liquid base)
• Dry Residual inside the Can >50%
• Gloss 5-15 Gloss (glossmeter angle 60°)
• Thickness 1 layer around 13 Micron
• Thickness 3 layers around 36 Micron
• Working Temperature +10°C / +100°C (spikes of 120° C)
• Drying time t=20°:
• Out Dust 60 minuti
• On touch 90 minuti
• In depth 36 ore
• Child-proof safety cap
• Colored Token & Ring
• Can suitable for different nozzles

For a professional result, carefully clean and sand the surface for a better adhesion, then apply the desired color.
It is recommended to use the product at a temperature around 20/25 ° c, and a humidity rate not more than 60%.
After the application of the color, we recommend to use a protective wax (v404 cp) or a trasnparent Varnish(v404 Tf) for a lasting effect and to ease washing dirt off.
Being a decorative product, the final result is mostly depending on the user’s manual ability.

SPRAY:
- Apply a first hand / coat light to improve coverage and adherence, to reduce the possibility of dropping. Apply
from a distance of 20-30 cm;
- After a few moments apply a second horizontal hand/coat immediately followed by a third vertical hand / coat;
- Let dry a few minutes;
- After use, it’s advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the actuator;
- After 24h, proceed with the normal use of painted piece.