AMBROSOL Inox-Stainless Steel Spray 400ml

This zinc coating is silicone resin based and it forms a protective layer. Formulated to remain unchanged over time with exceptional resistance to chemical corrosion and weathering, it has good mechanical strength. Quick dry coating.

Technical Specifications:

• Quantity: 400 ml
• Aspect: Tin-Plate can containing under pressure fluid
• Physical state: Pigmented liquid in aerosol
• Flash point: Und. 0° C extremely flammable
• Pressure: at 20°C 5,5 bar
• Relative density: at 20°C 0,73 ÷ 0,77 g/ml
• Propellant: LPG
• Chemical nature: Synthetic resin with inhibiting pigment of corrosion based on aluminum dust
• Colour: Steel
• Powder purity Zn: > 98%
• Odour: Characteristic of solvent
• Resistance temperature: 300 °C (peak 400 °C)
• % Metal in the dry film: 50 %
• Coverage: 2/3 mq2
• Drying times = 20°: Out dust: 10’, Dry to touch: 20’, Dry in depth: 12 hour

APPLICATION FIELDS: Surfaces in metal as iron, aluminum, steel. Protection of ferrous metallic structures, pipelines, eaves, enclosures, job tools etc.
HOW TO USE: Carefully clean the surface to be treated, eliminating encrustations and traces of rust with synthetic thinner. If necessary, sand with abrasive paper. Turn the can upside-down and shake well until the marbles move freely inside. To avoid dripping apply twice from a distance of about 20-30 cm. Once finished, spray for 2-3 seconds with the canupside-down to clean the valve and allow for future use.