AMBROSOL Silicone Sealant Remover Spray 400ml

Mix of solvents, designed to remove excess silicone or silicone scraps. The product acts more quickly in the presence of fresh silicone than it does in the presence of hardened silicone. When large amounts of silicone need to be removed, begin by removing as much silicone as possible. Afterwards, apply the solvent. It does not corrode or tarnish any surface.

Technical Specifications:

• Quantity: 400 ml
• Aspect: Tin-Plate can containing under pressure fluid
• Color: Light white
• Odour: Characteristic of solvent
• Relative density: at 20°C 0,68 ÷ 0,72 g/ml
• Flash point: Und. 0° C extremely flammable
• Pressure at 20°C: 4/6 bar
• Water: solubility insoluble
• Solvent: solubility Total
• Viscosity at 100°C: 3,8 cSt (dry residue)
• Melting point: 52-62°C ( dry residue )
• Penetration test: <= 30 dmm (25°C) ( dry residue )
• Observations: Product with gel technology, it doesn’t drip.

HOW TO USE: On Fresh silicone: Shake well before use and spray on the surface from a distance of about 15 cm, leave to act for a few minutes and then clean with a cloth or scrapping tool. Hardened silicone: Scrape the biggest section carefully with a blade or putty knife. Shake well before use and spray the surface from a distance of about 15 cm and leave the product to act for a few minutes. Remove with a rag or scrapping tool Repeat the operation if necessary.