AMBROSOL Chrome Zinc Spray 400ml

A single-component cold galvanizer formulated with synthetic resins and aluminium that makes it particularly light-colored and shiny. Ideal for finishing where a shiny and mirror-like surface is required. It gives the surface treated good resistance against weathering. It dries rapidly, permitting the surface treated to be worked after just 15 minutes. Suggested for use on all galvanized parts, gates, gutters, etc. Even on coarse iron surfaces that must be protected and given a particularly bright shine. Suitable for retouching the galvanized/electrolyte zinc.

Technical Specifications:

Quantity: 400 ml
Aspect: Tin-Plate can containing under pressure fluid
Physical state: Pigment liquid in aerosol
Flash point: Und. 0° C extremely flammable
Pressure: at 20°C at 20° 5,5 bar
Relative density: at 20°C 0,71 ÷ 0,75 g/ml
Propellant: LPG
Chemical nature: synthetic resin and aluminium paste
Color: Chrome silver
Odour: Characteristic of solvent
% Metal in dry film: 38 %
Temperature Resistance 250 °C (peaks 300 °C)
Yield: 2/3 mq2
Drying time: Out dust 15 minutes, Dry to touch: 30 minutes, Dry in depth: 12 hours

WHERE TO USE: metal surfaces such as iron, aluminum, steel. Protection of ferrous metal structures, pipes, gutters, fences, tools etc.
HOW TO USE: Clean the surface to be treated to remove dirty and rust using synthetic thinner. If necessary, sand with fine sandpaper. Turn the bottle and shake it well until you hear the marbles move freely inside the can. Spray the product on the surface to be treated and then proceed with painting if desired. To prevent dripping, apply two thin coats at a distance from the support of about 8-10 inches. After use, spray for 2/3 seconds with the bottle upside down to avoid blocks in the dispenser.