AMBROSOL Light Zinc Spray 400ml

It is a cold galvanizer with high molecular weight. It chemically solidifies producing a long-lasting metal coating. It protects all metal surfaces from oxidation. It forms a resistant layer which can be painted or left as a final finish protection. It is ideal for retouching, finishing, and repairing galvanized parts where a light grey coat is required.

• Quantity: 400ml
• Aspect: Tin-Plate can containing under pressure fluid
• Physical state: Pigmented liquid in aerosol
• Flash point: Und. 0° C extremely flammable
• Pressure: at 20°C 5,5 bar
• Relative density: at 20°C 0,71 ÷ 0,75 g/ml
• Propellant: LPG
• Chemical nature: Synthetic resin with inhibiting pigment of
• corrosion based of zinc dust
• Colour: Aluminum / light grey
• Powder purity Zn: > 98%
• Odour: Characteristic of solvent
• Resistance temperature: 300 °C (peak of 400 °C)
• % Metal in the dry film: 64 %
• % Zinc in the dry film: 12 %
• Coverage: 2/3 mq2
• Drying times = 20°: Out dust: 10’, Dry to touch: 20’, Dry in depth: 6 hours, Overpainted after 24 hours

APPLICATION FIELDS: Surfaces in metal as iron, aluminum, steel. Protection of ferrous metallic structures, pipelines, eaves, enclosures, job tools etc.
HOW TO USE: Carefully clean the surface to be treated, eliminating encrustations and traces of rust with synthetic thinner. If necessary, sand with abrasive paper. Turn the can upside-down and shake well until the marbles move freely inside. To avoid drip-ping apply twice from a distance of about 20-30 cm. Once finished, spray for 2-3 seconds with the can upsidedown to clean the valve and allow for future use.