AMBROSOL Anti-Slip for Surfaces Spray 400ml

This product was designed for the treatment of slippery surfaces such as stairs, ramps, showers, and floors in general. It creates a silicone coat, which when in contact with water increases the friction, reducing the risks of slippery surfaces.

Technical Specifications:

• Quantity: 400 ml
• Aspect: Tin-plate can containing under pressure fluid
• Color: Colorless
• Odour: Characteristic of solvent
• Relative density: at 20°C 0,72 ÷ 0,76 g/ml
• Flash point: Und.0° C extremely flammable
• Pressure at 20°C: 4/6 bar
• Dry residue in the bottle Approx. 22%
• Yield: 400 ml = 5 mq2 approx.
• Operating temperature: -10°C / +150°C (Picchi 170° C)
• Suitable surfaces: Metal, iron, plastic, steel, natural stones, cementitious materials, ceramics, porcelain, stoneware, clinker etc.
• Drying times: t=20°
• Out of dust: 10 minutes
• Dry on touch: 15 minutes
• Dry on depth: 22 hours

HOW TO USE: Clean the surface to be treated with synthetic thinner and / or abrasive paper. Shake the can well until the marbles move freely inside the cylinder. To prevent dripping, apply two thin coats at a distance of 20-30 cm. After use, spray 2/3 seconds with the spray can turned upside down to prevent the dispenser from blocking.