MO - FRI: 8:00 - 15:00  | (+30) 23810 24350

AMBROSOL Special Spray Primers 400ml - White Putty

11.35  inc tax
(11.35  inc tax)
571108.0000
Διαθέσιμο από 1 έως 3 ημέρες
+

This paint is designed to be used as the base coat for a fi nishing enamels. It provides a strong base to ensure the perfect adhesion of the enamel spray on difficult surfaces such as plastics and metals. It protects metal surfaces from rust. On cars it covers small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. It dries on touch in roughly 15 minutes and dries fully in roughly 22 hours. For overcoating are required at least 24/48 hours. After use, it’s advisable to spray for 2/3 seconds with the can upside down, to avoid the block of the nozzle.


Technical Specifications:

  • Quantity 400 ml
  • Box / Case 6 Pz.
  • Aspect Tin-Plate can containing under pressure fluid
  • Chemical nature Acrylic
  • Colour Various
  • Odour Characteristic of solvent
  • Relative density at 20°C 0,71 ÷ 0,75 g/ml
  • Flash point Und. 0° C extremely flammable
  • Writes on spray bottom Barcode, Batch date, product name
  • Pressure at 20°C 5,5 ± 0,5 bar
  • Pressure at 50°C 8,0 ± 0,5 bar
  • Viscosity Ford cup from 10’’ to 15’’
  • Dry residual in spray from 12% to 15%
  • Gloss From 7 to 80 Gloss (Glossmeter angle 60°)
  • Thickness 1 coat 13-24 Micron
  • Drying time T=20°C:
  • Out dust: 15-30 minutes
  • Dry to touch: 15-30 minutes
  • Dry in full depth: 22 hours
  • Overcoating Interval: 22/48 hours
  • Security cap child-proof patented and registered
  • Token and ring with color reference
  • Check the color and/or product type on the cap and/or on the bottom of
  • the can.

SPRAY:
- Apply a first hand/coat light to improve coverage and adherence, to reduce the possibility of dropping. Apply from a distance of 20 cm;
- After a few moment apply a second horizontal hand/coat immediately followed by a third vertical hand-coat;
- Let dry a few minutes;
- After use, it’s advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the actuator;
- After 24h, proceed with the normal use of painted piece.


White putty: applied as a base and prevents rust. Leaves a thick layer on the surface. With excellent coverage and filling properties.

Plastic: base for the perfect application of spray paints on metal and plastic surfaces.

Grey/ Red/ White primer: applied as a base and prevents rust. In different colors for different finish colors.

Capacity:
400ml
Colour:
White

Similar Products