AMBROSOL Finishes Bodywork Spray Paint For Rims 400ml - Aluminum

It’s a professional enamel spray ideal for for the paiting of rims wheels of motorcycles and cars. Thanks to its textured / embossed fi nish, this special paint is specifi c for repainting or renewing bumpers, side panels and spoilers.

Technical Specifications:

• Quantity 400 ml
• Box / Case 6 pcs
• Aspect Tin-Plate can containg pressurized liquid
• Chemical Nature Acrylic
• Color Various – color card
• Odor Typical of solvent
• Relative density at 20°C 0,73 ÷ 0,77 g/ml
• Flash point Extremely Flammable < 0° C
• Writes under the bottom Barcode, batch date, product name
• Pressure at 20°C 5,5 ± 0,5 bar
• Pressure at 50°C 8,0 ± 0,5 bar
• Viscosity Ford Cup 12’’-15’’
• Dry Residual inside can 12.5% - 15%
• Gloss 7 - 70 Gloss (glossmeter angle 60°)
• Thickness 1 layer 13 - 24 Micron
• Drying times T=20°C:
• Dry out dust 15 minutes
• Dry on touch 30 minutes
• In depth 24 h
• Child-proof safety cap
• Colored Token and ring
• Check the color and the product type on the cap or the bottom of the can.

SPRAY:
- Apply a first hand / coat light to improve coverage and adherence, to reduce the possibility of dropping. Apply from a distance of 20-30 cm;
- After a few moments apply a second horizontal hand/coat immediately followed by a third vertical hand / coat;
- Let dry a few minutes;
- After use, it’s advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the actuator;
- After 24h, proceed with the normal use of painted piece.