AMBROSOL High Temperatures Spray Paint 400ml - Black Matte Ral9005

It is a high quality enamel with a modified silicone resin base, which allows you to renew all surfaces normally exposed to high temperatures. Heat resistant up to 300°C-700°C (check the Technical data sheet). Application: parts of heaters, stoves, ovens, chimney flues, barbecues, fire screens, motorcycle mufflers, etc. don’t expose in direct contact with flames. Important: to obtain an optimal and long lasting result it is necessary for the painted parts to be exposed even if only once, to a temperature of at least 180°C; any less will make the hardening and adhesion of the enamel only partial. Clean carefully the surface before application and shake vigorously the can. After use, it’s advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the nozzle.

Technical Specifications:

• Quantity 400 ml
• Box / Case 6 Pz.
• Aspect Tin-Plate can containing under pressure fluid
• Chemical nature Modified acrylic silicone
• Colour Various
• Odour Characteristic of solvent
• Relative density At 20°C 0,72 ÷ 0,76 g/ml
• Flash point Und. 0° C extremely flammable
• Writing on spray bottom Barcode, batch date, product name
• Pressure at 20°C 5,5 ± 1, bar
• Pressure at 50°C 8,0 ± 0,5 bar
• Viscosity Ford cup From 10’’ to 13’’
• Dry residual in spray From 15% to 22%
• Granulometry Bottom Scale 0 a 2 Micron
• Gloss From 7 to 95 Gloss (Glossmeter angle 60°)
• Thickness 1 coat 13-18 Micron
• Thickness 3 coats 36-40 Micron
• Resistance temperature Aluminium: 600°C peaks of 700°C
• Matt black: 400°C peaks of 500°C
• Anthracite: 350°C peaks of 400°C
• Red ox: 300°C peaks of 350°C
• Red Brake Calipers: 150°C peaks of 200°C
• Trasparent/White: 250°C peaks of 300°C
• Drying times t=20° Out dust 10 minutes
• Dry to touch 15 minutes
• Dry in depth 22/48 hours
• Security cap child-proof patented
• Token and ring with colour reference
• Check the color and/or product type on the cap or the bottom of the can

SPRAY:
- Apply a first hand / coat light to improve coverage and adherence, to reduce the possibility of dropping. Apply
from a distance of 20-30 cm;
- After a few moments apply a second horizontal hand/coat immediately followed by a third vertical hand / coat;
- Let dry a few minutes;
- After use, it’s advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the actuator;
- After 24h, proceed with the normal use of painted piece.